Home » How to install an SSD in a gaming PC

How to install an SSD in a gaming PC

(Pocket-lint) – Games are getting greater and greater, so it is no shock that individuals are rapidly working out of house on their gaming rigs.

If your storage is full to the brim, and you do not need to sacrifice any efficiency through the use of an old style HDD, it is time to add an additional SSD.

Don’t fear, although, it is a very simple improve, and we’ll take you thru all the things you want to know in regards to the course of.

What sort of SSD do you have to purchase?

The largest determination to make when shopping for an SSD is whether or not to go along with an NVMe, SATA or exterior choice. So, let’s check out what every of those choices provides:


SATA SSDs are the oldest and, subsequently, most typical kind of SSD. They’re most frequently discovered within the 2.5-inch kind issue, which makes them preferrred for upgrading the storage of an older system. They’re higher in each regard compared with conventional spinning disk Hard Drives. However, the SATA connection maxes out at round 600MB/s, so, these in search of most efficiency will need to learn on.

Almost any pc constructed within the final couple of a long time will assist a SATA SSD, compatibility is by far the broadest of any of the SSD choices.


NVMe drives are most frequently discovered within the M.2 kind issue pictured right here. These drives forego the SATA connection and are as an alternative mounted straight on the motherboard to attain staggering speeds. Most NVMe drives utilise the PCIe 3.0 customary which permits for speeds as much as 3.9Gbps however the newest and best PCIe 4.0 drives can exceed that, as much as a theoretical restrict of seven.8Gbps.

If you’ve gotten a comparatively trendy system, chances are high that your motherboard will assist PCIe 3.0 M.2 SSDs. PCIe 4.0 assist is much less widespread, requiring both an AMD Ryzen 3000 / 5000 sequence or Intel eleventh Gen or newer CPU.


External SSDs are the best of the bunch to put in, as all you want to do is plug them right into a USB port. Plus, you may simply switch your video games and information between programs, when you’ve got a desktop and a laptop computer, for instance. Just like the interior drives, externals can be found in each NVMe and SATA flavours, there isn’t any distinction in the best way that they function, only one is far sooner than the opposite.

As you’d anticipate from a USB system, compatibility is just about common, however the efficiency that you simply’re in a position to obtain will depend upon the port that it will get plugged into. If you resolve to go along with an exterior drive, rigorously examine the specs of your pc and cross-reference it with the connection kind of the SSD to make sure that you could profit from the complete velocity.

How to put in a SATA SSD in a desktop PC

Before we begin, this is what you will want for the job:

  • An SSD (after all)
  • A screwdriver
  • A SATA cable

SATA cables arent all the time supplied with SSDs, as an alternative, they’re most frequently discovered within the field together with your motherboard. If you do not have one, they’re very simple to search out on Amazon and will not set you again a lot in any respect.


Turn off your energy provide (if attainable) and unplug the PC from the wall.

Remove each facet panels of your PC, normally by eradicating thumbscrews on the rear of the case and sliding the panels off.

You’ll need to get your SSD located first, as this can let you understand the place the cables want to succeed in. We have a tendency to search out our chosen mounting level first, however not screw the SSD in place till it is related up.

Next, find your energy provide and search for a cable with an extended L-shaped connector, this can present energy to your SSD. Route it to the mounting level and join it to your SSD.

Then we have to discover a spare SATA port on the motherboard, these additionally use an L form connector, but it surely’s a lot shorter than the ability cable connector.

Plug one finish of the SATA cable into the motherboard and the opposite into the SSD.

Finally, mount your SSD utilizing both 4 screws on the bottom or the facet of the drive, relying in your mounting level. If you have bought an uncommon chassis with no 2.5-inch mounting, double-sided tape or velcro can even do the job, do not ask us how we all know.

Reassemble your PC, plug it again in and boot it up. Then you may skip to the “How to arrange your new SSD” part beneath.

How to put in an NVMe SSD in a desktop PC

Installing an NVMe SSD is even simpler, as there are not any cables to fret about. You’ll solely want a screwdriver to get the job carried out.

As all the time, flip off your energy provide (if attainable) and unplug the PC from the wall earlier than persevering with.

Locate your M.2 slot, and undo the mounting screw.

Then, align the SSD with the socket, you will discover that it is notched and may solely go in a method round. Usually, the SSD’s brand will probably be going through outwards. Insert the SSD at an roughly 45-degree angle, do not drive something, it ought to go in fairly simply.

Push the SSD downward in order that it lays flat in opposition to the standoff, and re-insert the retaining screw to maintain it in place.

As with the SATA drive, reassemble your PC, plug it again in and boot it up earlier than shifting on to the subsequent step.

How to arrange your new SSD

Some SSDs are able to exit of the field, and if that is the case, you will see the brand new quantity seem within the ‘This PC’ part of file explorer.

However, If it is not there, you will want to make use of the Windows Disk Management software to initialise the drive and create a storage partition. That could sound daunting, however belief us, it is good and simple.

The Disk Management Tool may be discovered underneath “Create and format exhausting disk partitions” in both the Start Menu or Control Panel. It will present you all your related drives in a listing, your newest addition would be the one listed with “unallocated house”. Just observe these easy steps to get it working correctly:

  1. Right-click on the world that claims unallocated house, then choose New Simple Volume and hit Next after the wizard opens.
  2. Leave the quantity dimension alone, it is going to default to the utmost obtainable house, click on Next.
  3. Choose a drive letter from the listing, or simply depart it on the default letter, click on Next.
  4. On this display screen make sure that the File system is ready to NTFS and depart the allocation dimension on its default setting,
  5. If you want, you may give the drive a reputation, or you may simply depart it clean. Check the field subsequent to Perform a fast format and click on Next.
  6. Click Finish then Format Disk.

Once that is full you are all sorted, time to fill it up with large video games!

PC Gaming Week (9 – 13 May) in affiliation with Nvidia GeForce RTX
Whether you’re a PC Gaming veteran or a complete beginner, we have you lined!
Visit our PC Gaming hub to get all the most recent information and evaluations, try some nice options and discover particulars of the most effective merchandise round.
With a great deal of nice content material dropping daily, you’ll want to bookmark the web page and are available again on your every day repair.

Writing by Luke Baker. Editing by Chris Hall.